Inplant for Wool

Description

Product Specifications
Fragrance:
None.
Appearance:
White powder.
pH:
@ use 8.0-9.0.
Dilution:
1 lb. in 50 gallons water.
Coverage:
Varies
Packaging:
50 lb. Container.
SDS:
Click for SDS
SKU:
IPW
Inplant for Wool
Fabpro’s Inplant detergent for Wool is specially designed for inplant rug cleaning. It gets out embedded dirt in all man-made and natural fibers.

Not recommended for jet extraction equipment. Formulated for loose rug cleaning equipment.

Dissolves completely.
It dissolves readily in hot or cold water to form a clear solution.
Leaves tank clean with no sediment. No clogging of screens or valves. Allows your carburetion system to function better. Will reduce downtime in your operation.

Contains specially formulated anti-redispostion agents.
Unique formula suspends soil for most effective rinsing. Foaming qualities are such that it will produce enough foam to lubricate and suspend dirt, but will break readily at the rinsing cycle. Waste drains easily without a build up of foam.

100% active ingredients Rinses out easily.
Contains no fillers, is completely biodegradable and contains no harmful optical brighteners. Complete rinsing ensures cleaner and whiter fringes and less chance of browning.

Fast, uniform penetration.
Drying takes place evenly on both sides of rug. This prevents excessive wicking and reduces “Browning” problems.

Easy to use directions.
The first consideration is whether the plant is operating with a carburetor or without a carburetor. We will treat these circumstances separately.

In-plant cleaning with a carburetor:
In order to avoid weighing and measuring, it is desirable to mix full bag quantities of Inplant detergent for Wool in the concentrated tank. If the concentrated tank has a capacity of 120 gallons or more you will be able to dissolve 50 pound bags of Inplant detergent for Wool into solution with proper agitation. The adjustment for proper strength is then made via the carburetor.

The proper method for dissolving Inplant detergent for Wool into the concentrated tank is to fill the tank about 1/3 with warm (not cold water or hot water exceeding 140° F) before starting to add Inplant detergent for Wool. Start the agitator and slowly add Inplant detergent for Wool while the tank continues to fill with water. Allow the rug cleaning machine to run for a few minutes to allow the mixture to work through and stabilize. A pH reading should then be taken of the diluted detergent. The mixture should then be adjusted to satisfy the customer’s needs.

In-plant cleaning without a carburetor:
Use the same powder mixing procedure as prescribed for concentrate tanks except that the quantity of Inplant detergent for Wool will be greatly reduced.

As a rule of thumb use one (1) pound per 100 gallons. Use two (2) pounds per 100 gallons for very soiled carpets.

Keep in mind that if a carpet cleaner is floor scrubbing with a rotary, he will frequently flush the carpet with water before scrubbing. This water in the rug will dilute the solution being put on the rug. The solution fed onto the rug must be stronger to compensate for this.

pH: maintains at 8.0-9.0 even at low dilutions.

Packaged in a 50 lb. container.