Kill Odor SR
Decontaminant & Deodorizer
Effective on even hardest to remove odors.
For use on all fibers including stain-resistant type. Compatible with all types of surfactants. Works on urine, vomit, smoke, perspiration, medicinals, and rancid foods and oils.Especially formulated for the professional in-plant or on location carpet cleaner.Can be used in plants with drying rooms to eliminate the odor sources which result from high humidity or can be cooled on location as a pre-spray to treat carpet itself.
Can be used to treat odors in the carpet backing or pad.
Fabpro’s Kill Odor SR will work deep down in the carpet backing or pad to effectively neutralize odors and their sources. Needle injecting of Kill Odor SR is an economical alternative to the expensive method of taking up carpet to remove odors.
Also removes odors and odor sources found on hard surfaces.
Effective in the removal of odors from ceramic tile, concrete, wood vinyl, plastic, marble, and other hard surfaces. May be wiped, sponged, or mopped with the finest results expected on hard surfaces. An excellent replacement for harsh pine oil cleaners.
Available in fresh green apple scent.
In addition to eliminating odor-causing sources, Kill Odor SR provides a pleasant green apple aroma to replace the unpleasant odor it’s neutralizing while its working.
Economical to use.
Kill Odor SR is concentrated for use up to 64:1 on hard surfaces. Kill Odor SR allows you to meet the “odor demand” the first time.
Easy to use directions.
Simply spray properly diluted Kill Odor SR on affected area using a portable hand pump or electric sprayer. May also be added to the cleaning solution to provide a “special” clean fragrance to both carpet and air.
As a pre-spray:
Generally dilute Kill Odor SR with 5 parts water. For heavy odors, dilute with less water. Using a hand pump sprayer or electric sprayer, apply liberally on affected area with a course spray. Caution: DO NOT USE concentrated or diluted Kill Odor SR in a fogging machine.
Allow Kill Odor SR to remain on affected area as long as possible. Then clean using generally accepted carpet cleaning techniques. If odor persists, repeat procedure. If entire carpet needs treatment, the amount and dilution depends on the strength of the odor.
As a truck mount or portable extraction machine deodorant:
The use of 1 ounce of Kill Odor SR in 1 gallon of portable extraction machine ready-to-use cleaning solution, or 8-10 ounces of Kill Odor SR in a truck mount stock solution will freshen the carpet and the air.
If odor has settled to backing and pad, then a concentrated mixture of Kill Odor SR should be applied with a needle injector directly to carpet back and pad.
For hard surface deodorization:
Effective in deodorizing hard surface areas that produce odors. Wipe, sponge or mop affective areas with a mixture of 2 ounces of Kill Odor SR to each one gallon of water (64:1)
Flash point: Non-combustible.
pH: in use: 6.0-8.0 mildly acidic.
Conveniently packaged:
Available in 4/1 gallon case, or economical 5 gallon container and 55 gallon drum. |
