TrafficClean Ultra XP

Description

Product Specifications
Fragrance:
None.
Appearance:
Clear water white.
pH:
@ use 6.0-8.0.
Dilution:
4 ounces to 1 gallon water.
Coverage:
Up to 6800 sq. ft. per gallon.
Packaging:
4/1 gallon case.
SDS:
Click for SDS
SKU:
TCUXP
TrafficClean Ultra XP
A specially formulated pre-spray, Faabapro’s TrafficClean Ultra XP is concentrated (1:32 dilution) for cleaning high traffic areas. It is safe on all wet cleanable fibers, odorless, non-corrosive, biodegradable formula. Clear homogenous, easy to mix. Made with soft deionized water, pH 8. Does not contain toxic solvents or VOC’s (volatile organic compounds). High penetrants help loosen soil and grease readily.Safe for all fibers.
Effective against soil but gentle and safe to both stain resistant and wool fibers.Free rinsing, leaves negligible dry crystalline residue.
It’s free rinsing feature makes it effective for use in both plant and on location. And one product for both applications means lower inventory for you.

Ultra concentrated formula saves money and labor.
Fabpro’s TrafficClean Ultra XP is an ultra concentrated formula of heavy soil loosening ingredients to save time, labor and money in the carpet cleaning process. The economical and high dilution ratio with water up to 1:32 for on-location cleaning and in-plant cleaning compares most economically with traditional 1:4 dilution ratios. That’s up to 800% more cleaner for on-location cleaning and in-plant cleaning. The result: more ready to use cleaner to efficiently clean more heavily soiled carpet.

Powerful cleaning partner with detergent.
It readily combines with other detergents and loosens soil that resists detergents alone.

Easy to use directions.
ON LOCATION CLEANING:
As a pre-spray: dilute by putting 4 ounces of TrafficClean Ultra XP and filling with water to 1 gallon (1:32). Apply to traffic lane using a portable sprayer. In order to increase cleaning efficiency, brush lightly with a hand pile brush.
Hydroforce: (1:9 high pressure model) add 1½ quarts of TrafficClean Ultra XP for 1:32 dilution, 2 ½ quarts for 1:21 dilution to container, fill with water. Prespray and extract.
As a cleaning solution booster: add 2 ounces of TrafficClean Ultra XP to each gallon of ready to use detergent or shampoo solution.
Use as an all purpose spotter: dilute 2 ouncs of TrafficClean Ultra XP with 30 ounces of water (1:16 dilution) and apply before scrubbing.
Use as a special restaurant pre-spray for protein grease soiled areas: in two gallons of hot tap water, add 4 ounces of Fabpro’s Enzyme Powder Detergent USR and 2 ounces of TrafficClean Ultra XP. Spray over carpet and allow to stand for approximately five minutes before cleaning with normal, industry accepted cleaning procedures.

IN-PLANT USE:
With automatic scrubbers: dilute 4 ounces of TrafficClean Ultra XP to 1 gallon with water (1:32). Apply to rug with an in-plant sprayer before placing rug in machine. For heavily soiled rugs, allow diluted TrafficClean Ultra XP to remain on the rug for approximately five minutes before scrubbing.
Use with in-plant rotary scrubber: wet carpet with water. Dilute 4 ounces of (6 ounces if heavily soiled) TrafficClean Ultra XP with 128 ounces of water, Spray soiled areas with mixture and scrub with detergent. If rug is heavily soiled, allow diluted TrafficClean Ultra XP to soak for approximately five minutes before scrubbing with detergent.

pH: 6.0-8.0 concentrated. pH is closer to 7 when diluted with neutral pH water.

Flash point: None.

Conveniently packaged in 4/1 gallon case.