Safe for all fibers.
Effective against soil but gentle and safe to both stain resistant and wool fibers.

Can be used in-plant or on location.
Its free rinsing feature makes it effective for use in both plant and on location. And one product for both applications means lower inventory for you.

Concentrated formula saves money and labor.
Fabpro's Traffic Lane Cleaner SR is a concentrated formula of heavy soil loosening ingredients to save time, labor and money in the carpet cleaning process. The economical and high dilution ratio with water up to 10:1 for on-location cleaning and up to 12:1 for in-plant cleaning compares most economically with traditional 4:1 dilution ratios. That's up to 120% more Traffic Lane Cleaner SR for on-location cleaning and up to 160% more pre-spray for in-plant cleaning. The result more ready to use Traffic lane Cleaner SR to efficiently clean more heavily soiled carpet.

Powerful cleaning partner with detergent.
It readily combines with other detergents and loosens soil that resists detergents alone.

Easy to use directions.
ON LOCATION CLEANING:
As a pre-spray: dilute by putting 10 ounces of Traffic Lane Cleaner SR and filling with water to 1 gallon (12:1). Apply to carpet traffic lane using a portable sprayer. In order to increase cleaning efficiency, brush lightly with a hand pile brush.
As a cleaning solution booster: add 2 ounces of Traffic Lane Cleaner SR to each gallon of ready to use detergent or shampoo solution.
As an all purpose spotter: dilute 8 ounces of Traffic lane Cleaner SR with 24 ounces of water (3:1 dilution) and apply before scrubbing.
As a special restaurant pre-spray for protein grease soiled areas: in two (2) gallons of hot tap water, add 4 ounces of Fabpro's Enzyme Powder Detergent USR and 6 ounces of Traffic Lane Cleaner SR. Spray over carpet and allow to stand for approximately five minutes before cleaning with normal, industry accepted cleaning procedures.
IN-PLANT USE:
With automatic scrubbers: dilute 10 ounces of Traffic Lane Cleaner SR with 120 ounces of water (12:1). Apply to rug with an in-plant sprayer before placing rug in machine. For heavily soiled rugs, allow diluted Traffic Lane Cleaner SR to remain on the rug for approximately five minutes before scrubbing.
Use with in-plant rotary scrubber: wet carpet with water. Dilute 10 ounces of Traffic Lane Cleaner SR with 120 ounces of water, spray soiled areas with mixture and scrub with detergent. If rug is heavily soiled, allow diluted Traffic Lane Cleaner SR to soak for approximately 5 minutes before scrubbing with detergent.

Flash point: None

pH: 6.0-8.0 concentrated. pH is closer to 7.0 when diluted with neutral pH water.

Conveniently packaged.
Available in 4/1 gallon cases or economical 5 gallon container and 55 gallon drum.