E Z GO STRIP A

NO RINSE-NO CAUSTIC
MOP STRIPPER

Benefits:
E-Z GO STRIP A is a combination of detergents, wetting agents and water soluble solvents that break down polymer bonds and keep dirt and residue in suspension for easy clean-up. Save valuable labor dollars with E-Z GO STRIP A. E-Z GO STRIP A leaves no caustic/alkali residue; therefore the rinsing step is not necessary in order to insure compatibility with subsequent sealer/finish coatings.

Directions:
For Mop Stripping: Dilute E-Z GO STRIP A with 1 to 5 parts of water, depending on type and condition of material to be removed. Apply, allow dwelling for at least 5 minutes, rewet, scrub and pick up. For most conventional metal-cross linked floor finishes, dilute E-Z GO STRIP A much further up to 1/4 cup per gallon
For Machine Stripping: Dilute 1 part of E-Z GO STRIP A with 16 parts of water (1 cup per gallon).

Warning: Irritating.
Avoid contact with skin or eyes.

First Aid Procedures:
In case of contact with skin flush with water. For eyes flush with water for 15 minutes and get prompt medical attention. If swallowed, drink a large quantity of water. Do not induce vomiting. Do not give anything by mouth to unconscious person. Call a physician. Wash contaminated clothing before reuse.

For more detailed information on product usage, contact FABPRO at
3000 E. Preston Street, Baltimore MD. 21213, or phone 410-325-5040.

For Professional Use Only
Keep Out of Reach of Children