Traffic Lane Cleaner
A specially formulated pre-spray concentrated for hard to clean carpet
areas. Over the years, no single product has performed the job better
than our original Fabpro's Traffic Lane Cleaner. As new technology
has developed, we have continued to refine our original formulation
to bring you the best heavy soil loosening and labor saving pre-spray
available.
Safe for all fibers.
Effective against soil but gentle and safe to both synthetic and
wool fibers.
Can be used in-plant or on location.
It's free rinsing feature makes it effective for use in both in-plant
and on location. One product for both applications means lower inventory
for you.
Concentrated formula saves money and labor.
Fabpro's Traffic Lane Cleaner is a concentrated formula of heavy
soil loosening ingredients to save time, labor and money in the
carpet cleaning process. The economical and high dilution ratio
with water up to 10:1 for on-location cleaning and up to 12:1 for
in-plant cleaning compares most economically with traditional 4:1
dilution ratios. That's up to 120% more traffic lane cleaner for
on-location cleaning and up to 160% more pre-spray for in-plant
cleaning. The result is more ready to use Traffic Lane Cleaner to
efficiently clean more heavily soiled carpet.
Powerful cleaning partner with detergent.
It readily combines with other detergents and loosens soil that
resists detergents alone.
Easy to use directions.
ON LOCATION CLEANING:
As a pre-spray: dilute by putting 10 ounces of Traffic Lane Cleaner
to 1 gallon of water (12:1). Apply to carpet traffic lane using
a portable sprayer. In order to increase cleaning efficiency, brush
lightly with a hand pile brush.
As a cleaning solution booster: add 2 ounces of Traffic Lane Cleaner
to each gallon of ready to use detergent or shampoo solution.
As an all purpose spotter: dilute 8 ounces of Traffic lane Cleaner
with 24 ounces of water (3:1 dilution) and apply before scrubbing.
As a special restaurant pre-spray for protein grease soiled areas:
in two gallons of hot tap water, add 4 ounces of Fabpro's Powder
Enzymatic Pre-spray and 6 ounces of Traffic Lane Cleaner. Spray
over carpet and allow to stand for approximately five minutes before
cleaning with normal industry accepted cleaning procedures.
IN-PLANT USE:
With automatic scrubbers: dilute 10 ounces of Traffic Lane Cleaner
with 120 ounces of water (12:1). Apply to rug with an in-plant sprayer
before placing rug in machine. For heavily soiled rugs, allow diluted
Traffic Lane Cleaner to remain on the rug for approximately five
minutes before scrubbing.
Use with in-plant rotary scrubber: wet carpet with water. Dilute
10 ounces of Traffic Lane Cleaner with 120 ounces of water, spray
soiled areas with mixture and scrub with detergent. If rug is heavily
soiled, allow diluted Traffic Lane Cleaner to soak for approximately
5 minutes before scrubbing with detergent.
Flash point: None.
Buffered pH: Even in diluted form
the pH remains a powerful 11.0-11.5 for quick soil loosening.
Conveniently packaged.
Available in 4/1 gallon case, or economical 5 gallon container and
55 gallon drum.
|
